Hi Mark,
yes, you are right... these are different VLANs
I configured the other phone to use the same IP (192.168.1.13)... and it
worked flawlessly... on the SAME Networkcable in the same plug...
so it must have something to do with the polycom phone config...
remember... when I use tcp the phone tries to register, but does not
even try with udp...
thank you,
yves
Am 21.12.2016 um 13:34 schrieb Mark Wiater:
Yves,
Didn't you say that
AsteriskServer: 192.168.1.211
SIP-user: 165
?
On 12/21/2016 4:24 AM, Yves wrote:
. It is sure for 100% that there is no firewall or something else
mangeling
in between... another Hardphone works as expected using the same
Netzworkcable on the same Networkplug with UDP on Port 5060...
This other hardphone, what IP does it have?
000050.848|cfg |*|03|RT|Primary IP changed to 192.168.0.13 subnet
mask 255.255.255.0
The line above suggests to me that your phone and your asterisk server
are on a different network, there has to be something that routes
between those two networks. Often what routes, can firewall.
000122.941|sip |4|03|Registration failed User: 165, Error Code:480
Temporarily not available
Mark
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
