Hi Yves, Maybe your switch put your Polycom inside a Voice VLAN, based on the MAC of the phone. Maybe with the snom this not happen because your switch don't see the MAC of the Snom as a "supperted IP Phone".
2016-12-21 13:59 GMT-03:00 Yves <yves...@gmx.de>: > sorry... typo.... > the problematic phone has the 192.168.0.13 > the asterisk has 192.168.1.211 > > when i connect a snom phone on the cable that was in the soundstation 6000 > before and configure the > phone to use 192.168.0.13 it does register on the asterisk via 5060/UDP... > > it would be helpful if someone, that has a running soundstation ip 6000 > could send the configuration... :-/ > > regards, > yves > > > > Am 21.12.2016 um 15:13 schrieb Mauricio Tavares: > >> On Wed, Dec 21, 2016 at 7:50 AM, Yves <yves...@gmx.de> wrote: >> >>> Hi Mark, >>> >>> yes, you are right... these are different VLANs >>> I configured the other phone to use the same IP (192.168.1.13)... and it >>> worked flawlessly... on the SAME Networkcable in the same plug... >>> so it must have something to do with the polycom phone config... >>> remember... >>> when I use tcp the phone tries to register, but does not even try with >>> udp... >>> >>> thank you, >>> yves >>> >>> I am a bit confused: is your problematic phone's IP 192.168.0.13 >> (what the error log is reporting below) or 192.168.1.13? >> >> Am 21.12.2016 um 13:34 schrieb Mark Wiater: >>> >>> Yves, >>> >>> Didn't you say that >>> >>> AsteriskServer: 192.168.1.211 >>> SIP-user: 165 >>> >>> ? >>> >>> On 12/21/2016 4:24 AM, Yves wrote: >>> >>> . It is sure for 100% that there is no firewall or something else >>> mangeling >>> in between... another Hardphone works as expected using the same >>> Netzworkcable on the same Networkplug with UDP on Port 5060... >>> >>> >>> This other hardphone, what IP does it have? >>> >>> >>> 000050.848|cfg |*|03|RT|Primary IP changed to 192.168.0.13 subnet mask >>> 255.255.255.0 >>> >>> The line above suggests to me that your phone and your asterisk server >>> are >>> on a different network, there has to be something that routes between >>> those >>> two networks. Often what routes, can firewall. >>> >>> 000122.941|sip |4|03|Registration failed User: 165, Error Code:480 >>> Temporarily not available >>> >>> >>> >>> Mark >>> >>> >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Check out the new Asterisk community forum at: >>> https://community.asterisk.org/ >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: > https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- GnuPG Key ID: 0x39BCA9D8 https://www.github.com/mefhigoseth ...:::[ God Rulz ! ]:::...
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users