Check the crossover cable. Nicholas Bachmann wrote:
Howdy -
I'm trying to get a Malaysian PRI E1 up on a TE410P, with no luck. Right now, the setup is
Telco -> HDSL -> WorldDSL UTU801-> 2 BNC E1 -> balun -> crossover -> TE410P
Right now, the CSU/DSU-ish WorldDSL box has a green light indicating E1 sync, but the TE410P shows a red alarm. I checked the card by plugging the crossover from port 1 to port 2 on the 410 (it worked fine). It I change any of the cabling (i.e. swap things around), the green light goes off.
I have my suspicions about the balun (http://www.ctcu.com/catalog/datacom/balun.pdf). Would a DB15F-RJ45 converter be better the the BNC-balun-RJ45 arrangement we have now?
Here's my zaptel.conf: span=1,1,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31
The telco line IS working; it was tested and put in a couple of days ago. Any ideas why this isn't working?
Nick
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
