Hi. Just for grins, reverse the BNC's. You could have the tx and rx crossed, happens all the time on ds-3's. Also, with the BNC's unplugged and hanging, You should have a Yellow light on the Hdsl Box (I've always called that a smartjack, but we call football soccer, so what do we know? :) ). If you don't get a yellow light with the BNC's hanging then the smartjack probably has an internal loopback set and you need to give your telco a call to clear it.
Good Luck, Ejay Hire ISDN-Net Network Engineer > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Nicholas Bachmann > Sent: Saturday, March 06, 2004 12:01 AM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] E1 Red Alarm > > Howdy - > > I'm trying to get a Malaysian PRI E1 up on a TE410P, with no luck. > Right now, the setup is > > Telco -> HDSL -> WorldDSL UTU801-> 2 BNC E1 -> balun -> > crossover -> TE410P > > Right now, the CSU/DSU-ish WorldDSL box has a green light > indicating E1 > sync, but the TE410P shows a red alarm. I checked the card > by plugging > the crossover from port 1 to port 2 on the 410 (it worked > fine). It I > change any of the cabling (i.e. swap things around), the green light > goes off. > > I have my suspicions about the balun > (http://www.ctcu.com/catalog/datacom/balun.pdf). Would a DB15F-RJ45 > converter be better the the BNC-balun-RJ45 arrangement we have now? > > Here's my zaptel.conf: > span=1,1,0,ccs,hdb3 > bchan=1-15 > dchan=16 > bchan=17-31 > > The telco line IS working; it was tested and put in a couple of days > ago. Any ideas why this isn't working? > > Nick > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users