Hello,
I have the following setup:
Network A <==> Network B <==> Network C
|
|
\----------------------------------------/
All 3 locations are connected with a layer2 vpn to make it transparent
with the same ip range 10.0.0.x/24.
Network A and C is close to each other and have another direct routed
tunnel 192.168.1.x/24.
I would like to route the calls between A and C on this direct tunnel.
What is the best way of accomplishing it?
The phones are older OpenStage models and only support 1 SIP server,
that would have been my first idea just to setup a secondary Asterisk on
location A or C and have the phones register on both sip servers.
My other idea would be to setup a secondary Asterisk on location A or C
and link the two with IAX. However B is strategically more important
than A or C since it has the dialout setup to PSTN. Let's say the second
asterisk is setup at C and that loses connectivity with B (while A still
have it's tunnel up), that will result both A and C are separated from B
also in this case all of A's phone traffic is routed through C.
Any ideas are welcome.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at: https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users