Hi, I would use some dynamic routing protocol. For this purpose would be better don't mix L2 and L3. Then you can use OSPF or RSTP.
S pozdravem Tomáš Holý > 6. 12. 2019 v 18:47, "free...@tango.lu" <free...@tango.lu>: > > Hello, > > I have the following setup: > > Network A <==> Network B <==> Network C > | | > \----------------------------------------/ > > All 3 locations are connected with a layer2 vpn to make it transparent with > the same ip range 10.0.0.x/24. > > Network A and C is close to each other and have another direct routed tunnel > 192.168.1.x/24. > > I would like to route the calls between A and C on this direct tunnel. > What is the best way of accomplishing it? > > The phones are older OpenStage models and only support 1 SIP server, that > would have been my first idea just to setup a secondary Asterisk on location > A or C and have the phones register on both sip servers. > > My other idea would be to setup a secondary Asterisk on location A or C and > link the two with IAX. However B is strategically more important than A or C > since it has the dialout setup to PSTN. Let's say the second asterisk is > setup at C and that loses connectivity with B (while A still have it's tunnel > up), that will result both A and C are separated from B also in this case all > of A's phone traffic is routed through C. > > Any ideas are welcome. > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Check out the new Asterisk community forum at: https://community.asterisk.org/ > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Check out the new Asterisk community forum at: https://community.asterisk.org/ New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
