Unfortunately even though it would seem the phone should support the ability to play custom ring tones, at present it only supports the internal tones which are:-
Bellcore-BusyVerify Bellcore-Stutter Bellcore-MsgWaiting Bellcore-dr1 Bellcore-dr2 Bellcore-dr3 Bellcore-dr4 Bellcore-dr5 --- Extract from the SIP 6.0 Firmware Release Notes --- http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp79 60/addprot/sip/relnote/phnrn60s.htm In RFC-3261, the Alert-Info header is specified as a URL. When the Alert-Info header is received, the phone downloads the file from the URL and plays it as the alternate ring tone. This release does not support any external ringers. Only the tones and ring patterns that are already internal to the phone can be selected and played as an alternate ring tone. In this release, the Alert-Info header consists of a name of an internal tone or ringing pattern that can be played, as shown in the following example: Alert-Info: <Bellcore-Busy> There is no need to add a file extension (.au, .wav) to these names because the names are internal to the phone. When an Alert-Info header is received, the software scans the list of known tones and ringing patterns to find a match. If the software finds a match, the phone plays that tone or ringing pattern. If the software does not find a match, the phone plays the alert ringing pattern as it does today. > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Rich Adamson > Sent: Sunday, 21 March 2004 9:28 AM > To: Asterisk-a-users-list > Subject: [Asterisk-Users] Use of Alert_Info with C7960? > > Using Asterisk CVS-03/20/04-11:54:56 with 7960 v6.2 and playing around > with distinctive ringing, trying to make it work. Extensions.conf looks > like: > > exten => 3010,1,SetVar(ALERT_INFO=3) ; selects Ringer > exten => 3010,2,Dial(SIP/3010,15) > exten => 3010,3,Voicemail2(u3010) > exten => 3010,102,Voicemail2(b3010) > exten => 3010,103,Hangup > > Calling that extension, the CLI indicates: > -- Executing SetVar("SIP/3002-39d1", "ALERT_INFO=3") in new stack > -- Executing Dial("SIP/3002-39d1", "SIP/3010|15") in new stack > -- Called 3010 > -- SIP/3010-f848 is ringing > > On the phone, Settings/Ring Type indicates: Chirp 1, Chirp 2, Old Style > and Synth Low. The first three choices produce different ringing sounds > when selected from the display. > > I expected Alert_Info=3 to cause the C7960 to ring with the Old Style > ringer, but it doesn't and setting it to 2 or 3 doesn't make any > difference. > > Am I doing something wrong? > > Rich > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users