Then what's the point of being able to upload custom ring tones? (as shown in http://www.loligo.com/asterisk/Cisco/79xx/current/RINGLIST.DAT )
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Christopher Lee > Sent: Saturday, March 20, 2004 8:50 PM > To: Asterisk Users > Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960? > > Unfortunately even though it would seem the phone should > support the ability to play custom ring tones, at present it > only supports the internal tones which are:- > > Bellcore-BusyVerify > Bellcore-Stutter > Bellcore-MsgWaiting > Bellcore-dr1 > Bellcore-dr2 > Bellcore-dr3 > Bellcore-dr4 > Bellcore-dr5 > > --- Extract from the SIP 6.0 Firmware Release Notes --- > http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon > /english/ipp79 > 60/addprot/sip/relnote/phnrn60s.htm > > In RFC-3261, the Alert-Info header is specified as a URL. > When the Alert-Info header is received, the phone downloads > the file from the URL and plays it as the alternate ring > tone. This release does not support any external ringers. > Only the tones and ring patterns that are already internal to > the phone can be selected and played as an alternate ring tone. > > In this release, the Alert-Info header consists of a name of > an internal tone or ringing pattern that can be played, as > shown in the following > example: > > Alert-Info: <Bellcore-Busy> > > There is no need to add a file extension (.au, .wav) to these > names because the names are internal to the phone. When an > Alert-Info header is received, the software scans the list of > known tones and ringing patterns to find a match. If the > software finds a match, the phone plays that tone or ringing > pattern. If the software does not find a match, the phone > plays the alert ringing pattern as it does today. > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:asterisk-users- > > [EMAIL PROTECTED] On Behalf Of Rich Adamson > > Sent: Sunday, 21 March 2004 9:28 AM > > To: Asterisk-a-users-list > > Subject: [Asterisk-Users] Use of Alert_Info with C7960? > > > > Using Asterisk CVS-03/20/04-11:54:56 with 7960 v6.2 and > playing around > > with distinctive ringing, trying to make it work. Extensions.conf > > looks > > like: > > > > exten => 3010,1,SetVar(ALERT_INFO=3) ; selects Ringer exten => > > 3010,2,Dial(SIP/3010,15) exten => 3010,3,Voicemail2(u3010) exten => > > 3010,102,Voicemail2(b3010) exten => 3010,103,Hangup > > > > Calling that extension, the CLI indicates: > > -- Executing SetVar("SIP/3002-39d1", "ALERT_INFO=3") in > new stack > > -- Executing Dial("SIP/3002-39d1", "SIP/3010|15") in new stack > > -- Called 3010 > > -- SIP/3010-f848 is ringing > > > > On the phone, Settings/Ring Type indicates: Chirp 1, Chirp 2, Old > > Style and Synth Low. The first three choices produce > different ringing > > sounds when selected from the display. > > > > I expected Alert_Info=3 to cause the C7960 to ring with the > Old Style > > ringer, but it doesn't and setting it to 2 or 3 doesn't make any > > difference. > > > > Am I doing something wrong? > > > > Rich > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users