Ho do I go about loading the ztdummy driver after unloading zap? Thanks,
-Steve > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Michiel Betel > Sent: Thursday, April 08, 2004 10:55 AM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Zapata required? > > Steve, > > No you don't need the zap drivers if you are not using > zap-based hardware. You might want to use the ztdummy driver > though as a timing source for conferencing. > Since the asterisk zaptel support is in a loadable module > you can instruct Asterisk *not* to use it by specifiing > noload => chan_zap.so > in /etc/asterisk/modules.conf > > Steven Kokinos wrote: > > > Hello- > > > > As part of the asterisk build/installation instructions it mentions > > that the zaptel drivers should be built and configured first. My > > question is whether they are required at all, in the case > of a system > > with no hardware cards at all (as is the situation in my case). > > > > With them loaded I continually get the following message on > my console > > (server not asterisk): > > > > Zapata Telephony Interface Registered on major 196 No ISA tormenta > > card found at d0000 Zapata Telephony Interface Unloaded > > > > which seems logical given that I don't have any zap hardware. how > > would i go about unloading this module and/or does it need to be > > compiled at all in this case? > > > > Regards, > > > > -Steve > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users