On Thu, 2004-04-15 at 17:18, Mike Machado wrote: > When people call into my * box over the T1 interface, they get no ring > tone. It rings the SIP phone and when the SIP user picks up, both > parties can hear each other ok, its just the PSTN user calling in hears > no ring. What could be causing this? > > I tried setting immediate to yes in zapata.conf, but that causes my DNIS > and CallerID to stop being available. > > T100P with E & M Wink start signaling, all 24 channels are inbound > channels (no channel bank or anything like that) to SIP ATAs. The ATA is > sending a 180 Ringing reply to the invite, but still no ring. Same > symptoms with different vendor ATA devices.
Explicitly answer the line. If that doesn't handle inband audio, there is a r flag to dial. This was discussed very recently. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users