HTH, Ryan
On Apr 16, 2004, at 10:30 AM, Mike Machado wrote:
You can usually get CLI on an E&M robbed bit T1 by configuring it right.
Instead of just sending you the DNIS as a string of DTMF they usually
send *<cli>*<dnis>*. The DNIS and CLI may be swapped, and there may be
less than 3 *s in the string - wonderful consistency, eh? :-\
I am getting CallerID and DNIS on the inbound calls. What I really need
is to be able to set callerID on outbound calls. I am trying to set the
callerid using SetCIDNum just before using Dial on a zap channel, but it
looks like the switch guys have it set to always stamp the same callerID
on the my outbound calls no matter what I put in SetCIDNum or what
channel on the T1 I use. Is this a misconfiguration of the switch or a
limitation of the signaling protocol? If its the switch, can you give me
any pointers as to what I could ask them to look for, or if its the
protocol, do you know any other signaling protocol that lets me set
outbound callerID (besides PRI)?
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
