I have an X100P connected to an extension of
a Panasonic PBX. When a call from the PSTN comes in, it is routed
directly to the extension where the x100p is . I want * to answer
the call, play a message and then transfer the call to another extension
via the Zap channel where the call was received (I need to flash the zap
channel) . If this extension doesn't answer I want then to dial an IAX
channel.
The problem is that when I do a Flash on
the zap channel, and then try to dial a new extension via that zap
channel I get the following error "can't create zap
channel".
If I do a
SendDTMF(XXXX) the call does get transfer to the new
extension but then * gets out of the call loop and don't know it is
answered or not by the new extension.
Am I missing something? Why am I getting the
"can't creat za channel"
Thanks in advance.
Dan
|
- [Asterisk-Users] x100p / Answer-> Flash -> Dial Dan Fernandez
- RE: [Asterisk-Users] x100p / Answer-> Flash ->... Dan Fernandez
- RE: [Asterisk-Users] x100p / Answer-> Flash ... Sam Bingner
- RE: [Asterisk-Users] x100p / Answer-> Fl... Andy Farnsworth