Title: Message
|
Even
if you could get that to work properly, which I dont know... the callprogress
detection is horrible; if you want to do that reliably you need a T1,ISDN or
IP interface to the switch (something that actually provides proper call
progress)
Sam
I have an X100P connected to an extension of
a Panasonic PBX. When a call from the PSTN comes in, it is
routed directly to the extension where the x100p is . I want *
to answer the call, play a message and then transfer the call to another
extension via the Zap channel where the call was received (I need to flash the
zap channel) . If this extension doesn't answer I want then
to dial an IAX channel.
The problem is that when I do a Flash on
the zap channel, and then try to dial a new extension via that zap
channel I get the following error "can't create zap
channel".
If I do a
SendDTMF(XXXX) the call does get transfer to the new
extension but then * gets out of the call loop and don't know it is
answered or not by the new extension.
Am I missing something? Why am I getting the
"can't creat za channel"
Thanks in advance.
Dan
|
smime.p7s
Description: S/MIME cryptographic signature
