Problem fixed. Here's the solutions for those who care:
- TDM400P has slots 1,2,3,4 - "channel" in the zaptel.conf must match the slot the card is in.
I have the daughter cards in slot 1 and 3.
BUT here's the kicker: if the zaptel.conf configures channel 1 and 2 (not 3). No error is reported, and ztcfg -vv reports:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
If zaptel.conf configures channels 1 and 3 (not 2), ztcfg-vv reports:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 03: FXS Kewlstart (Default) (Slaves: 03)
Which is the right answer.
-- David
On May 19, 2004, at 1:36 PM, Rich Adamson wrote:
Looks to me like you have 1 and 3 installed, not 1 and 2. Look close at your dmesg output.
------------------------Hi-
I'm totally stumped configuring my TDM400P with one FXS and one FXO
module. Before I got the FXO module, I used to have an X101P, and
everything was working very well. Now * doesn't seem to recognize the
FXO channel. I've searched the wiki and the list archives. Stock Debian
3.0 stable installation. Any advice? Thanks.
-- David
Here's my configuration:
modprobe zaptel modprobe wcfxs
report no errors.
box:/etc/asterisk# ztcfg -vv
Zaptel Configuration ======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
---------------
So it looks like things are OK so far. Here's the relevant portion of my zaptel.conf:
defaultzone=us # load FXO X100P channel 1, kewlstart signalling # turned off, card removed #fxsks=1 # load FXS TDM400P channel 1, kewlstart signalling fxoks=1 # load FXO TDM400P channel 2, kewlstart signalling fxsks=2
And here's what dmesg reports:
Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 12 for device 00:09.0 Freshmaker version: 63 Freshmaker passed register test Module 0: Installed -- AUTO FXS Module 1: Not installed Module 2: Installed -- AUTO FXO Module 3: Not installed Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Registered tone zone 0 (United States / North America)
-----------------------------------------------
the relevant portions of my zapata.conf are:
[channels] language=en usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes busydetect=yes callprogress=yes
; interfaces for internal analog phones signalling=fxo_ks threewaycalling=yes transfer=yes group=1 context=from-internal callerid="Creemer" <01> channel => 1 mailbox=01
; interfaces to the external PSTN line signalling=fxs_ks context=from-pstn group=2 channel => 2
-----------------------------------------------
starting asterisk gives: [chan_zap.so] => (Zapata Telephony w/PRI) == Parsing '/etc/asterisk/zapata.conf': Found May 19 10:42:20 DEBUG[1024]: chan_zap.c:1077 update_conf: Updated conferencing on 1, with 0 conference users -- Registered channel 1, FXO Kewlstart signalling May 19 10:42:20 WARNING[1024]: chan_zap.c:665 zt_open: Unable to specify channel 2: No such device May 19 10:42:20 ERROR[1024]: chan_zap.c:5340 mkintf: Unable to open channel 2: No such device here = 0, tmp->channel = 2, channel = 2 May 19 10:42:20 ERROR[1024]: chan_zap.c:7376 setup_zap: Unable to register channel '2' May 19 10:42:20 WARNING[1024]: loader.c:313 ast_load_resource: chan_zap.so: load_module failed, returning -1 == Unregistered channel type 'Tor' == Unregistered channel type 'Zap' -- Unregistered channel 1 -- Unregistered channel 2 May 19 10:42:20 WARNING[1024]: loader.c:408 load_modules: Loading module chan_zap.so failed!
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
---------------End of Original Message-----------------
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users