Looks to me like you have 1 and 3 installed, not 1 and 2. Look close at your dmesg output.
------------------------ > Hi- > > I'm totally stumped configuring my TDM400P with one FXS and one FXO > module. Before I got the FXO module, I used to have an X101P, and > everything was working very well. Now * doesn't seem to recognize the > FXO channel. I've searched the wiki and the list archives. Stock Debian > 3.0 stable installation. Any advice? Thanks. > > -- David > > > Here's my configuration: > > modprobe zaptel > modprobe wcfxs > > report no errors. > > box:/etc/asterisk# ztcfg -vv > > Zaptel Configuration > ====================== > > > Channel map: > > Channel 01: FXO Kewlstart (Default) (Slaves: 01) > Channel 02: FXS Kewlstart (Default) (Slaves: 02) > > 2 channels configured. > > --------------- > > So it looks like things are OK so far. Here's the relevant portion of > my zaptel.conf: > > defaultzone=us > # load FXO X100P channel 1, kewlstart signalling > # turned off, card removed > #fxsks=1 > # load FXS TDM400P channel 1, kewlstart signalling > fxoks=1 > # load FXO TDM400P channel 2, kewlstart signalling > fxsks=2 > > > And here's what dmesg reports: > > Zapata Telephony Interface Registered on major 196 > PCI: Found IRQ 12 for device 00:09.0 > Freshmaker version: 63 > Freshmaker passed register test > Module 0: Installed -- AUTO FXS > Module 1: Not installed > Module 2: Installed -- AUTO FXO > Module 3: Not installed > Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) > Registered tone zone 0 (United States / North America) > > ----------------------------------------------- > > the relevant portions of my zapata.conf are: > > [channels] > language=en > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > busydetect=yes > callprogress=yes > > ; interfaces for internal analog phones > signalling=fxo_ks > threewaycalling=yes > transfer=yes > group=1 > context=from-internal > callerid="Creemer" <01> > channel => 1 > mailbox=01 > > ; interfaces to the external PSTN line > signalling=fxs_ks > context=from-pstn > group=2 > channel => 2 > > ----------------------------------------------- > > starting asterisk gives: > [chan_zap.so] => (Zapata Telephony w/PRI) > == Parsing '/etc/asterisk/zapata.conf': Found > May 19 10:42:20 DEBUG[1024]: chan_zap.c:1077 update_conf: Updated > conferencing on 1, with 0 conference users > -- Registered channel 1, FXO Kewlstart signalling > May 19 10:42:20 WARNING[1024]: chan_zap.c:665 zt_open: Unable to > specify channel 2: No such device > May 19 10:42:20 ERROR[1024]: chan_zap.c:5340 mkintf: Unable to open > channel 2: No such device > here = 0, tmp->channel = 2, channel = 2 > May 19 10:42:20 ERROR[1024]: chan_zap.c:7376 setup_zap: Unable to > register channel '2' > May 19 10:42:20 WARNING[1024]: loader.c:313 ast_load_resource: > chan_zap.so: load_module failed, returning -1 > == Unregistered channel type 'Tor' > == Unregistered channel type 'Zap' > -- Unregistered channel 1 > -- Unregistered channel 2 > May 19 10:42:20 WARNING[1024]: loader.c:408 load_modules: Loading > module chan_zap.so failed! > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users ---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users