Hi Darren
If you are seeing IRQ misses there must be data misses too. :-)
Regards, Steve
Darren Nickerson wrote:
Steve,
We have no frame slips, so we probably have a frame slip problem ;-)
This may be plaguing us on our faxing. Gain and echo cancelation (ie: none) are all approximately correct, and yet still we cannot get reliable faxing through the POTS lines plugged into our FXO card on the Adit (whereas we can fax well when using the POTS lines directly). Faxing T1 -> T1 via a TE405P works well, ... it's only when we try to use the connection to the Adit (24 fxs_ks channels in a T1) that things go horribly wrong.
Is there any sure-fire way to detect frame slips? I see a counter for IRQ misses with zttool, but that's all. In my Adit600 I see lots of measures of errors (line errored seconds, controlled slip seconds, bursty errored seconds etc) but they're all zero.
Am I missing an obvious way to detect./observe these events?
-Darren
-- Darren Nickerson Senior Sales & Support Engineer iFax Solutions, Inc. www.ifax.com [EMAIL PROTECTED] +1.215.438.4638 +1.215.243.8335 (fax)
----- Original Message ----- From: "Steve Underwood" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, May 23, 2004 8:03 PM
Subject: Re: [Asterisk-Users] RxFAX generates no tiff file
Hi Petr,
For most people who are sure they have no frame slips, the problem usually turns out to be frame slips :-)
If you are *really* sure you do not have frame slips, then uncomment the first line in t30.c, and rebuild and reinstall spandsp. The when you exchange a fax you should end up with a pair of audio files in your /tmp directory - one for the transmit signal and one for the receive signal. Send those to me, and I will investigate.
Regards, Steve
Petr Grussmann wrote:
I have same problem connected to PBX over E1 and sync and not slip I have latest version spanDSP
I receiving 1/3 pages from faxis
? who is a problems-)
I Steve Underwood wrote:
Hi Troy,
People had a lot of problems like this with earlier versions of spandsp. However, the latest version is pretty solid, and people are using it in high volume production applications. If you are getting these bad results with the latest version I would be interested to see the audio log file, so I can investigate the reason.
Regards, Steve
Troy Settle wrote:
Dunno about not being able to generate a tiff, I got rxfax to do that, but they're badly malformed.
http://roanoke-voip01.psknet.com/fax/
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
