I just did it today successfully. :) The one BIG problem I have is: there is no battery when I pick up a phone connected to FXS port. My adtran tsu 600 has 24 fxs ports. Please could you tell me what kind of configuration you have in your adtran for fxs ports and what kind of configuration you have for zaptel and zapata. I have been struggling with adtran and T100p for 2 weeks now with no success so far.
If it is no problem I could use your help. Thank you in advance. bartosz ----- Original Message ----- From: "Stephen R. Besch" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, June 02, 2004 10:17 AM Subject: [Asterisk-Users] Re: Adtran TSU 600 > Bartosz Jozwiak wrote: > > > Hello, > > > > Did anybody successfully tried upgrade Adtran TSU 600 to > > firmware which is working properly with T100P and asterisk ? > > > > B. > > > > Yes, but it was a while ago (last August). I currently have the TSU600 > with 2 FXO/1 FXS cards running on a T100P with the only problem being > that the FXS card is a little flakey, but this has no bearing on the > T100P. I just downloaded the firmware and the stripped down version of > T-Flash that Adtran provides for flashing the firmware. Once the serial > link to the TSU was up and running properly, the firmware update went > without a hitch. > > Stephen R. Besch > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
