hi all, i am trying to get my TE410P (see previous posts) working in Austria (telekom Austria - i am still waiting for an answer for my questions).
my /etc/zaptel.conf looks like -------------------------------- span=1,1,0,ccs,hdb3,crc4,yellow span=2,2,0,ccs,hdb3,crc4,yellow bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47 loadzone=at defaultzone=at -------------------------------- after modprobe wct4xxp and ztcfg -s and ztcfg -v i'll get: -------------------------------- TE410P: Disabling interrupts since there are no active spans Registered tone zone 9 (Austria) TE410P: Span 1 configured for CCS/HDB3/CRC4 SPAN 1: Primary Sync Source TE410P: Span 2 configured for CCS/HDB3/CRC4 SPAN 2: Secondary Sync Source -------------------------------- ... on the card i can see the two leds pulsing red (i think thats the yellow alaram - or i am wrong) ? then i start asterisk with this zaptel.conf -------------------------------- [channels] switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 1 context = default channel => 1-15,17-31 switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 2 context=default channel => 32-46,48-62 ---------------------------- on the asterisk prompt i turn on pri intense debugging for span 1 or 2 (both the same result) and i will get (za 2 messages per second): ---------------------------- Sending Set Asynchronous Balanced Mode Extended > [ 00 01 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Urgent handler ---------------------------- ... and i have no idea what this means can someone please help me to get this working ? best regards Wolfgang _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users