Am Do, den 17.06.2004 schrieb Michael Bielicki um 10:32: > What is in your config file ? i've already posted my config in my first post - but here is my /etc/zaptel.conf -------------------------------- span=1,1,0,ccs,hdb3,crc4,yellow span=2,2,0,ccs,hdb3,crc4,yellow bchan=1-15,17-31 dchan=16 bchan=32-46,48-62 dchan=47
loadzone=at defaultzone=at -------------------------------- and my /etc/asterisk/zaptel.conf -------------------------------- [channels] switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 1 context = default channel => 1-15,17-31 switchtype = euroisdn signalling = pri_cpe pridialplan = local group = 2 context=default channel => 32-46,48-62 ---------------------------- > zaptel.conf ? > also, check the crc4 settings which crc4 settings ? - i've thought crc4 could only be turned on or off ? > and > maybe the wire you are using is wrong since some equippment needs > crossed wires, some needs straight wires. Crossed would be 1-4 2-5 i've already tried to use crossed wires - didn't worked either > > cheers > > Michael > > On Thu, 2004-06-17 at 10:28, Wolfgang Pichler wrote: > > Am Do, den 17.06.2004 schrieb Peter Svensson um 9:43: > > > On Thu, 17 Jun 2004, Wolfgang Pichler wrote: > > > > > > > ... on the card i can see the two leds pulsing red (i think thats the > > > > yellow alaram - or i am wrong) ? > > > > > > Are you sure it is not a red alarm? That would indicate a loss of link. > > > I think you can check with the command zttool. > > you are right - its a red alarm - zttool says "Red Alarm/Not Open" > > > > > > Are you sure the cables are correct? > > > Have you set the jumpers on the card to E1 and not left them on T1? > > The jumpers are on E1 - the cables should be ok (they are working with > > other hardware) - and the card is directly connected to a simens ULAF+ > > STU Desktop (can't really find much information about this device on the > > net) - which turns off a red led when i load the driver and do a ztcfg. > > > > > > I think the leds should turn green when the card senses a correct carrier > > > and framing on the lines. > > green is always a wounderful color ;-) > > > > so, what else could cause this ? > > > > wolfgang > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
