And it is throughly convoluted in the admin guide. What is the T for? Pipe obviously separates entries. X = any digit one would assume? I am just luooking for a brief explanation. Thanks.
Here is the excerpt from the manual. Attribute dialplan.digitmap Permitted Values string compatible with the digit map feature of MGCP described in 2.1.5 of RFC 3435. String is limited to 512 bytes and 20 segments; a comma is also allowed; when reached in the digit map, a comma will turn dial tone back on. [2-9]11|0T| 011xxx.T| [0-1][2- 9]xxxxxxxxx| [2-9]xxxxxxxxx| [2-9]xxxT Default Interpretation When this attribute is present, number-only dialing during the setup phase of new calls will be compared against the patterns therein and if a match is found, the call will be initiated automatically eliminating the need to press Send. Attribute Permitted Values Default Interpretation -----Original Message----- From: Eric Wieling [mailto:[EMAIL PROTECTED] Sent: Monday, July 19, 2004 11:50 AM To: [EMAIL PROTECTED] Subject: RE: [Asterisk-Users] Polycom IP 500 Voicemail On Mon, 2004-07-19 at 12:42, Wiley E. Siler wrote: > Thank you! > > Can you tell me more about the dial plan feature? How do you setup the > correct digitmap? It is all in the Admin Guide you can download from the Polycom web site. -- Eric Wieling * BTEL Consulting * 504-899-1387 x2111 "In a related story, the IRS has recently ruled that the cost of Windows upgrades can NOT be deducted as a gambling loss." _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
