RE: [Asterisk-Users] Robbed Bit T1 Configuration

[mattf]

Hello,   We have over a dozen T1s that are all robbed-bit D4/AMI, E&M Wink and we receive *ANI*DNIS from all of our carriers(10 digit ANI, 4 digit DNIS) and it all works fine. Who is your carrier? and why can't you get ANI if your use E&M?   MATT---   -----Original Message----- From: Paul Egger [mailto:[EMAIL PROTECTED] Sent: Friday, July 23, 2004 5:32 PM To: '[EMAIL PROTECTED]' Subject: [Asterisk-Users] Robbed Bit T1 Configuration Is it possible to control the dialing format used when making a call from asterisk separately from the inbound format?  In my case I have a single robbed-bit T1 configured for featd (to receive ANI and DNIS) on a TE410P.  This configuration works fine for inbound calls, however when an outbound call is made on this same T1 asterisk dials outbound in the featd format.  I need asterisk to only dial the phone number in the dial string (no more, no less), but as I said before asterisk dials out in the featd format, adding extra digits.  If I configure the circuit for E&M the outbound calls work fine, but then I cannot receive the ANI and DNIS on the inbound calls.  I need to make both inbound and outbound calls on the same T1 is this a possibility?  Has anyone had this issue or can possibly point me I the right direction?  Any help would be greatly appreciated.   Thanks,   Paul