Hello, Receiving that is just fine, you just need to get used to wildcards in extensions.conf
Here's what we use: exten => _*NXXNXXXXXX*4101*,1,Ringing exten => _*NXXNXXXXXX*4101*,2,Answer if it is a local T1 you will also need to add this: exten => _**4101*,1,Ringing exten => _**4101*,2,Answer (because you can dial a local number without sending CID but you can't on a 800 number) and so on... Hope this helps. MATT--- -----Original Message----- From: Paul Egger [mailto:[EMAIL PROTECTED] Sent: Friday, July 23, 2004 6:13 PM To: '[EMAIL PROTECTED]' Subject: RE: [Asterisk-Users] Robbed Bit T1 Configuration Matt, Thank you for your response. When we configure for E&M instead of featd, we can see Asterisk receive the *ANI*DNIS (in debug) however, it then attempts to match the received ANI/DNIS to an extension and we receive: Unknown extension '*1231231234*1234' in context 'default' requested If we configure for featd, Asterisk correctly routes the DNIS to extension 1234. Is there something that I'm missing? Paul _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
