Ok, i haven't get in hand the card and make remote hardware install.
It's certainely the problem.
Thanks !
At 22:49 20/08/2004, you wrote:
On Fri, 20 Aug 2004, Arnaud Pignard wrote:
> I try setup a TE410P. Already setup E100P without problem. I also check > sample zaptel.conf config in mailing list and seems my config is ok. > However when i modprobe wct4xxp, here is error output : > > ZT_CHANCONFIG failed on channel 97: No such device or address (6) > FATAL: Error running install command for wct4xxp
Have you configured the spans for E1 signalling? It sound like you have them set for T1 signalling (24*4=96). You should check the jumpers on the card.
Peter
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
