Dear Steve i use Mandrake 9.2 with libaudiofile0-devel-0.2.3-6mdk libaudiofile0-0.2.3-6mdk do you think is correct version? After that message Asterisk crash.. Thanks Dimitri
On Thursday 26 August 2004 13:33, Steve Underwood wrote: > Hi, > > The following part of your log: > > Fast carrier up > Ouch ... error while writing audio data: : Broken pipe > Ouch ... error while writing audio data: : Broken pipe > Floating point exception > > would seem to indicate some problem with the libaudiofile on your > machine. I guess libaudiofile must be installed, or you wouldn't even > get that stuff in the log. > > Regards, > Steve > > reseaux wrote: > >Dear Steve > > thanks for help, i now trace the log but no audio in /tmp > >------------- > > -- Starting simple switch on 'Zap/35-1' > > -- Executing RxFAX("Zap/35-1", "/home/user/testfax.tif") in new stack > >Changed from phase 0 to 1 > >Slow carrier up > >Slow carrier down > >Slow carrier up > >Slow carrier down > >Start receiving document > >Changed from phase 1 to 4 > >Sending ident > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > > > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > >>>>DIS: 80 00 ce f0 80 80 01 > > > > -- Remote UNIX connection > > -- Remote UNIX connection disconnected > >HDLC underflow in state 9 > >Changed from phase 4 to 3 > >T4 timeout in state 9 > >Changed from phase 3 to 4 > >Sending ident > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > > > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > >>>>DIS: 80 00 ce f0 80 80 01 > > > >T2 timeout > >Start receiving document > >Sending ident > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > > > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > >>>>DIS: 80 00 ce f0 80 80 01 > > > >HDLC underflow in state 9 > >Changed from phase 4 to 3 > >T4 timeout in state 9 > >Changed from phase 3 to 4 > >Sending ident > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > > > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > >>>>DIS: 80 00 ce f0 80 80 01 > > > >T2 timeout > >Start receiving document > >Sending ident > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > > > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > >>>>DIS: 80 00 ce f0 80 80 01 > > > >HDLC underflow in state 9 > >Changed from phase 4 to 3 > >T2 timeout > >Start receiving document > >Changed from phase 3 to 4 > >Sending ident > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > > > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > >>>>DIS: 80 00 ce f0 80 80 01 > > > >T4 timeout in state 9 > >Sending ident > > > >>>>CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 > > > >DIS: > >Preferred octets: 256 > >Can receive fax > >Supported data signalling rates: V.27ter and V.29 > >R8x7.7lines/mm and/or 200x200pels/25.4mm OK > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 > >R8x15.4lines/mm OK > >Minimum scan line time for higher resolutions: T15.4 = T7.7 > > > >>>>DIS: 80 00 ce f0 80 80 01 > > > >HDLC underflow in state 9 > >Changed from phase 4 to 3 > >Slow carrier up > ><<< TSI: 43 37 30 38 30 35 33 31 33 33 30 20 20 20 20 20 20 20 20 20 20 > >TSI without final frame tag > >Remote fax gave TSI as: "0331350807" > ><<< DCS: 83 00 86 a0 00 > >DCS with final frame tag > >In state 9 > >DCS: > >Can receive fax > >Selected data signalling rate: V.29, 9600bps > >2D coding OK > >Scan line length: 215mm > >Recording length: A4 (297mm) > >Minimum scan line time: 10ms > >Get at 9600 > >Changed from phase 3 to 5 > >Fast carrier up > >Ouch ... error while writing audio data: : Broken pipe > >Ouch ... error while writing audio data: : Broken pipe > >Floating point exception > >---------- > >Thanks in adavance > >Dimitri > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users