Hmmmm.... I guess from a troubleshooting standpoint to try and pinpoint the problem what I would do is remove all cards from the system and then only replace the cards that are absolutely necessary like your SCSI card and your Video card and of course the T100P and then check /proc/interrupts to see if you're having any more MISses... Also are you getting interrupt ERRs as well?
Is APIC enabled for your board? If it is, you'll see things like IO-APIC-edge or IO-APIC-level in your /proc/interrupts. If not, you'll see XT-PIC for all interrupts... If you can't get APIC turned on you might try upgrading your kernel, your motherboard/bios may be blacklisted in that particular kernel... You definitely DO NOT want to share interrupts on the T100P unless it's a low-interrupt device like a USB controller or your video card. You definitely don't want to share with say a NIC or a SCSI controller... If it is sharing with one of those, try shuffling the cards around in different slots and make sure that your T100P isn't in slot 5. Slot 5 is usually shared with Slot 1 if they're on the same bus... Of course you've probably already tried all of this but just in case you haven't... -Chris _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users