Thanks gentlemen for all your help and suggestions; For some reason, this setup of ours started to work perfectly again this morning and is still up without any of the symptoms and failures I described. We'll have to figure this out with our telco rep - I am certain this problem has not gone away...just like tech stocks, it just gave us a reprieve for a short while :(
Regards Josef -----Original Message----- From: Eric Wieling [mailto:[EMAIL PROTECTED] Sent: August 31, 2004 5:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] T100P No D-channels On Tue, 2004-08-31 at 15:58, Pliva, Josef wrote: > Unfortunately, I am seeing great many missed IRQs continually...if in fact > it is that which causes the loss of D-channel. Then you need to find out why interrupts are being locked for long enough to make the T100P miss interrupts. Common causes: frame buffer, graphics, RAID drivers, IDE DMA, and many, many other things. Doing an hdparm -u1 /dev/hda might help -- Eric Wieling * BTEL Consulting * 504-899-1387 x2111 "In a related story, the IRS has recently ruled that the cost of Windows upgrades can NOT be deducted as a gambling loss." _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
