Hi
all,
I have looked
through the wiki guides and also Siemens user guides but they haven't proven
useful. Nor has the normally trusty googling. Also have upgraded to
the latest Optipoint 400 Standard SIP firmware.
Having read a few
previous threads on the Optipoint it seems that there isn't much take up with
Asterisk. Which seems a shame as my experience with testing it has been
pretty good. Build quality is excellent and the interface seems quite user
friendly. Although the phone is pricey.
HOWEVER the
only problem I am having when doing interop testing is voice mail
pickup / indication doesn't appear to work.
Config:
Message Waiting IP address or DNS name:
<asterisk ip>
Voicemail number: 8500
*8500 = voicemenu
extension.
I'm guessing that
the phone just doesn't support the voice mail indication protocol that Asterisk
uses.
Can anyone confirm
this for me or better yet tell me where I am going wrong.
Thanks for any help
as I have limited time to chose a SIP hardphone to use in a small office phone
system I am helping to install and this will be my first time using Asterisk PBX
so am definitely to be considered a newbie.
cheers
Alex
(I also have a few
Pingtel hardphones, Grandstream Budgetone 100, Snom 100 somewhere and a broken
Cisco 7960)
--------------------------------------------
|Alex Barnes
|SQA
Engineer
|URL : http://www.ubiquitysoftware.com
--------------------------------------------
This email and any attached files are confidential and copyright protected. If you are not the addressee, any dissemination, distribution or copying of this communication is strictly prohibited. Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding.
Dear Friends of Ubiquity Software:
As you may have noticed, Ubiquity Software began using the web domain ubiquity.com earlier this year in addition to the previously established ubiquity.net for our website and email communications to you. However, since that time, a dispute has emerged with respect to actual ownership of the ubiquity.com domain.
As an international software company founded over decade ago, you can always reach Ubiquity Software under the website www.ubiquity.net <http://www.ubiquity.net/> and via email at @ubiquity.net. However, we have also chosen to expand our domain to the more specific www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/> for web and @ubiquitysoftware.com for email communications.
Please use either the historical ubiquity.net or begin to use the new ubiquitysoftware.com domain for all email communications to Ubiquity employees from now on.
Thank you.
Regards,
Ubiquity Software
www.ubiquitysoftware.com <http://www.ubiquitysoftware.com/>
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users