If I recall correctly, the problem with fxo port 1 is a hardware design issue with early TDM cards. Call digium support to confirm.
------------------------ > I had a similar problem but not exactly same: when telco lines are > plugged into the FXO ports, initially "zap show channel 1" says it is > "Onhook" but I cannot make outgoing calls. Once I unplug the telco > line and re-plug it, or after there is an incoming call, "zap show > channel 1" says "Offhook" but both incoming and outgoing calls work > fine. I believe this is related to a incomplete fix to bug #2359 but > my limited knowledge does not enable me to track down or fix the > problem. > > > ----- Original Message ----- > From: Felix Pizarro <[EMAIL PROTECTED]> > Date: Fri, 24 Sep 2004 08:53:20 -0700 (PDT) > Subject: [Asterisk-Users] TDM channel shows Offhook when I plug it to the telco > To: [EMAIL PROTECTED] > > > Hello, everyone > > I am having problems with a TDM400 that has 3 fxs modules and 1 fxo. > When plug a line from the telco to the fxo module it changes state > from onhook to offhook, and of course I can not receive any calls. > (When I tried to call from the outside to that line it shows as busy). > Could someone help me? I am at the customers site ;( > > Thanks a lot > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users ---------------End of Original Message----------------- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users