Dear Valued OnDO users, ==================================================== OnDO PBX v1.3 now supports 100 concurrent calls ====================================================
Brekeke is excited to announce our new OnDO PBX v1.3 with increased concurrent call capacity that is 4 times greater than the current release version OnDO PBX v1.2. -- How did Brekeke increase the capacity by so much? -- RTP relay OnDO PBX is well regarded among many users for its ease of use and administration. But we felt it needed to be spiced up to make our users and customers even happier. As you may know, Real-Time Transport Protocol (RTP) is commonly used for transmitting audio data for VoIP telephony. Until this version of OnDO PBX, all RTP packets were relayed through OnDO PBX. By minimizing the RTP packet traffic that go through OnDO PBX, we have succeeded in increasing the number of concurrent calls. You may ask how do we achieve this? By adopting DTMF-via-INFO method, we succeeded in decreasing the number of packets going through the server. All RTP packets are sent and received directly between SIP UAs, establishing peer to peer connections between them. Whenever an OnDO PBX user needs to send commands to forward calls or to put calls on hold, the information will be carried through SIP packets as INFO messages. For the phone or in situations where sending DTMF-via-INFO is not possible, OnDO PBX provides the option to turn "RTP relay" on or off from the OnDO PBX Admintool. -- Keep your "Favorites" with OnDO -- Brekeke offers "NO restriction" value to our customers Many VoIP products come with a series of strings attached, and the strings usually cost you more money. Brekeke strives hard to create products that won't restrict users' choice of phones, operating system platforms, or hardware equipment. As a result, we have a wide variety of users that use our products with their favorite list of products. With new OnDO PBX v1.3, we reserve the flexibility and openness of OnDO, yet enhance the possibility of OnDO products. OnDO PBX v1.3 is a super-sized version, so to speak. -- Questions about installing/using OnDO PBX? We know that it's a commitment on your part to learn about new software, so we'd like to help you! Brekeke Software offers a solution to technical support: an ONLINE FORUM THAT ALLOWS YOU TO DIRECTLY COMMUNICATE WITH OUR ENGINEERS. At Brekeke Software, we're always happy to help our users setup and configure their OnDO PBX systems for an optimal VoIP experience. Please post your technical questions in our support forum, and we'll get back to you as soon as we can. Brekeke Software is committed to offering you an unmatched level of support. http://www.brekeke.com/en/support/supportforum_en.html -- www.brekeke.com For sales information, please contact us at [EMAIL PROTECTED] Questions? Comments? Feedback? We'd love to hear from you! [EMAIL PROTECTED] ******************************************************************** Please do not reply to this email. You have received this email from Brekeke Software Inc because you registered to receive periodic news and updates that we believe may be of interest to you. TO UNSUBSCRIBE: Please send a blank email to [EMAIL PROTECTED] and you will be removed from our list. Copyright 2002-2004 Brekeke Software, Inc. All Rights Reserved. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users