Jim Van Meggelen wrote:
Actually, the IAXy is really very immature, and is desperate for several enhancements:
Yeap, rigth.
1. The MAC address needs to be visible on the unit. As it stands the only way to determine the identity of the thing is packet sniffing or looking through logs. This is tolerable in a lab, but ridiculous in production. What if I want to program 100 of them, and assign IP addresses based on MAC addresses?
Be methodic. Place a label of the ip used. Is on production, at fixed position: use fixed ip. Is on production, not fixed position: shellscript + xforms and you have a popup to tell where your iaxy is. Not the best solution, but, not a critical issue. At least not for me.
2. DNS support. The IAXy needs to be able to handle names.
Static * box ip using vpn. You need extra hardware, but due the dhcp and nat-piercing capabilities, you can live without this...
3. Restore to factory. There is currently no documented method to resore an IAXy to factory defaults. This means that if you have a stock of them that may or may not have been pre-configured, you'll need to do more packet sniffing to figure out what the IP address is.
Yes, this is an issue, iaxy unit do have something like a reset switch, I used, no luck. That where I relized to be methodic. Iaxy at production, label, not at production, provided with a generic 192.168.0.2/255.255.255.0 192.168.0.1 gw 192.168.0.1 * bpx configuration. Not to die for.
4. Some kind of TFTP, SSH or whatever is needed to allow connection and configuration of the device.
ssh needs a lot of hardware, tftp, maybe... providing works good for me. You may have a point.
I also love the IAXy (I use them happily in my lab), but it is much more of a beta device at this point. I really couldn't feel comfortable deploying them at customer locations until the management functions are improved.
I think, iaxy is a very well tougth product, and I´m using it at production. Mainly becose, it doesn´t have too much technical issues, it works perfectly with * and there is nothig a vpn + routing cannot solve.
Lukly there is a lot of people.
It'll get there I'm sure.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andres Tello Abrego
Sent: October 16, 2004 7:43 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] IAXy setup
:) I supposed that
iaxy are soooo beatiful!
rich allen wrote:
well it looks like i had a typo in the iax.conf. instead of disallow=all
i had dsallow=all which i didnt notice til i about to paste
the file.
thanks for responding
- hcir
could you paste the file u are trying to provide?
rich allen wrote:
iH
getting the following in the console when i go off hook from IAXy chan_iax2.c:5713 socket_read:Rejected connect attemp from 192.168.0.5 requested/compability 0x4/0x24 incompatible with our capability 0xff3 any idea what this is telling me? thanks
- hcir
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/> asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.775 / Virus Database: 522 - Release Date: 08/10/2004
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.775 / Virus Database: 522 - Release Date: 08/10/2004
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
