It seems that the capability negotiation failed. Also, try to use the latest version of asterisk-oh323. v0.5.10 is tooooo old.
Michael. On Fri, 22 Oct 2004, Astrit wrote: > Hi all, > I have completed asterisk-oh323 version 0.5.10 and I've registered it in > Gatekeeper (Cisco 3640 wich is H323 Proxy with Gatekeeper features), I've > also registered a Swissvoice in Gatekeeper . Now, when I make calls from > Cisco it works fine , > > but when I try to call from X-Lite it shows me the following errors : > > Executing Dial("SIP/310-2dc9", "OH323/[EMAIL PROTECTED]") in new stack Oct 20 > 14:50:12 ERROR[360471]: chan_oh323.c:2631 setup_h323_connection: Request to > open an existing channel 0 with the same direction 1. > -- Called [EMAIL PROTECTED] > Oct 20 14:50:12 WARNING[327701]: chan_oh323.c:1400 oh323_read: OH323/L20192: > Invalid format of RTP addresses. > -- Hungup 'OH323/L20192' > == No one is available to answer at this time > > My oh323.conf is : > > ; Configuration file of OpenH323 channel driver > > [general] > > listenAddress=0.0.0.0 > ; > listenPort=1720 > ; > ; > connectPort=1720 > ; > tcpStart=10000 > tcpEnd=20000 > ; > udpStart=10000 > udpEnd=20000 > ; > ; > fastStart=no > ; > h245Tunnelling=no > ; > ; > h245inSetup=no > ; > inBandDTMF=no > ; > silenceSuppression=yes > ; > jitterMin=20 > jitterMax=1000 > ; > ipTos=lowdelay > ; > ; > outboundMax=10 > inboundMax=10 > simultaneousMax=10 > ; > ; > bandwidthLimit=1024 > ; > wrapLibTraceLevel=1 > libTraceLevel=0 > libTraceFile=stdout > ; > gatekeeper=10.1.0.50 > ; > ; > gatekeeperTTL=600 > ; > userInputMode=TONE > > > ;----------------------------------------- > ; Configure H.323 aliases, prefixes and > ; related ASTERISK's contexts > ;----------------------------------------- > [register] > ; > context=h323 > alias=astra > > ;----------------------------------------- > ; Specify and configure CODEC related > ; options > ;----------------------------------------- > [codecs] > ; > ; > codec=G711A > frames=20 > ; > [astra] > type=h323 > prefix=400 > context=h323 > > > My extension.conf is: > > [general] > static=yes > writeprotect=no > > [h323] > exten => 400,1,Dial(OH323/[EMAIL PROTECTED]) include => sip include => mgcp > > [mgcp] > exten => 411,1,Dial(MGCP/aaln/[EMAIL PROTECTED]) include => h323 include => sip > > [sip] > include => mgcp > include => h323 > exten => _[3]XX,1,NoOp(^<D3>call for ^<D3>${EXTEN}) exten => > _[3]XX,2,Dial(SIP/${EXTEN},60,tr) exten => _[3]XX,3,Congestion() > > I can see that asterisk is registered in gatekeeper > > *CLI> oh323 show conf > > Configuration of OpenH323 channel driver > ---------------------------------------- > Version: 0.5.10 > Listening on address: 0.0.0.0:1720 > Gatekeeper used: [EMAIL PROTECTED] > FastStart/H245Tunnelling/H245inSetup: OFF/OFF/OFF Supported format(s): > ALAW<0> Jitter buffer limits (min/max): 20-1000 ms TCP port range: 10000 - > 20000 UDP (RAS) port range: 10000 - 20000 UDP (RTP) port range: 10000 - > 20000 IP Type-of-Service value: 16 User input mode: 2 Max number of inbound > H.323 calls: 10 Max number of outbound H.323 calls: 10 Max number of > simultaneous H.323 calls: 10 > > Anyone to help me ??? > > Regards, > > Astrit Morina > System Operator > > Tel: 038 20304050 > Fax: 038 20304020 > E-mail: [EMAIL PROTECTED] > www.ipko.net > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users