Hey Stewart, Thanks for the info..
Funny, thing, since 1.0.2 came out today, I went ahead and upgraded to that, now everything works. Must have been some bug with the CVS version I was on.. If you're having broadvoice problems, upgrade. Stewart Nelson <[EMAIL PROTECTED]> [2004-10-27 02:05:09 +0200]: > >Jeff, > > >I did a cut-n-paste of your configuration straight into my sip.conf, > >updated the username and password. Still getting the same result as > >before, audio in only one direction. Can can call between my local > >SIP extensions fine, so I know my sipura box is working and configured > >correctly. > > >I've sent another email to broadvoice, but I'm about to give up on > >them. Kinda sucks, because they have some of the better rates for > >BYOD. > > Don't give up; it should be easy to at least find out what is > going wrong. > > Your description is vague. I am assuming that "no incoming voice" > means that when you receive an incoming call via Broadvoice, you > cannot hear the caller but he can hear you. Also, when you place > an outgoing call via Broadvoice, you cannot hear the called party > but he can hear you. And, if you call from the Asterisk console > through Broadvoice, you cannot hear the called party but he can > hear you. Is that correct? > > If so, run Ethereal on the Asterisk machine and see if audio > packets are coming in from Broadvoice. > > If not: check that the SDP sent to Broadvoice has your correct > public IP address and a port in the correct range (if not, > check your externip, etc.) > > If the SDP is ok, see if Broadvoice audio is coming in to > your NAT (view statistics on router if available, or rig > another PC with Ethereal on WAN side.) > > If no incoming audio on WAN side, the NAT could be butchering > your SDP (it is SIP-aware but not adequately so) or there > could really be a problem with Broadvoice; test without the > NAT to be sure. > > If Asterisk is getting audio but not playing it, check: > Firewall on Asterisk machine > Correct codec being used > Correct payload size > Correct UDP checksum, etc. > > Good luck, > > Stewart > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users