I lied, it worked once, then back to the old state. I messed with it last night and have a better description.
People that call my broadvoice phone number cannot hear any audio, but I can hear them fine. If I call from * through broadband to a PTSN number, everything works great, so this is an inbound calling issue only. Really strange that it worked once.. Haven't been able to reproduce that. I'll start doing the ideas you mentioned. Brian Weaver <[EMAIL PROTECTED]> [2004-10-26 21:07:08 -0600]: > Hey Stewart, > > Thanks for the info.. > > Funny, thing, since 1.0.2 came out today, I went ahead and upgraded to > that, now everything works. Must have been some bug with the CVS > version I was on.. > > If you're having broadvoice problems, upgrade. > > > > Stewart Nelson <[EMAIL PROTECTED]> [2004-10-27 02:05:09 +0200]: > > >Jeff, > > > > >I did a cut-n-paste of your configuration straight into my sip.conf, > > >updated the username and password. Still getting the same result as > > >before, audio in only one direction. Can can call between my local > > >SIP extensions fine, so I know my sipura box is working and configured > > >correctly. > > > > >I've sent another email to broadvoice, but I'm about to give up on > > >them. Kinda sucks, because they have some of the better rates for > > >BYOD. > > > > Don't give up; it should be easy to at least find out what is > > going wrong. > > > > Your description is vague. I am assuming that "no incoming voice" > > means that when you receive an incoming call via Broadvoice, you > > cannot hear the caller but he can hear you. Also, when you place > > an outgoing call via Broadvoice, you cannot hear the called party > > but he can hear you. And, if you call from the Asterisk console > > through Broadvoice, you cannot hear the called party but he can > > hear you. Is that correct? > > > > If so, run Ethereal on the Asterisk machine and see if audio > > packets are coming in from Broadvoice. > > > > If not: check that the SDP sent to Broadvoice has your correct > > public IP address and a port in the correct range (if not, > > check your externip, etc.) > > > > If the SDP is ok, see if Broadvoice audio is coming in to > > your NAT (view statistics on router if available, or rig > > another PC with Ethereal on WAN side.) > > > > If no incoming audio on WAN side, the NAT could be butchering > > your SDP (it is SIP-aware but not adequately so) or there > > could really be a problem with Broadvoice; test without the > > NAT to be sure. > > > > If Asterisk is getting audio but not playing it, check: > > Firewall on Asterisk machine > > Correct codec being used > > Correct payload size > > Correct UDP checksum, etc. > > > > Good luck, > > > > Stewart > > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
