> "chan_capi.c:2603 load_module: Unable to load config capi.conf"
You need to create this file /etc/asterisk/capi.conf with the following content : [general] nationalprefix=0 internationalprefix=00 [interfaces] msn=50 incomingmsn=* controller=1 softdtmf=0 accountcode= context=incoming ;echosquelch=1 echocancel=no ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=30 Adjust devices= with the number of B channels supported by your card. For ISDN BRI, it's 2, for PRI, it's 30. > Now I *do* have some kind of ISDN card in the box which I have not > worried about yet (Eicon Diva 2.01 S/T PCI according to lspci) and I > understand that CAPI has something to do with ISDN, but I have no clue > as why asterisk doesn't start... You need a kernel support for you card and you also need to load a firmware for some cards. If you have a message like "CAPI not installed!", check your kernel. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users