Thanks for the tip! I'm still having a couple of quirks though...
Adjust devices= with the number of B channels supported by your card. For
ISDN BRI, it's 2, for PRI, it's 30.
Okay, I did that but then I had the exact error you describe below...
You need a kernel support for you card and you also need to load a firmwareWell I do get that message, but I can modprobe capi, see it with lsmod and also see /dev/isdn and /dev/capi20 - so I *assume* the eicon diva card is sort-of-recognized (not sure though... I have zero experience with ISDN cards...)
for some cards.
If you have a message like "CAPI not installed!", check your kernel.
I use the linux 2.6.7 kernel which came with the knoppix distro I've installed on the box. I have checked with make xconfig and the options for isdn support and capi support all seem to be there OK.
Thanks to the list I have managed to compile asterisk from CVS head yesterday and my current target is to be able to pick up the sip phone, dial an extension and hear a little music. Very little ambitions for now :-)
Anyway, any ideas on what might be wrong with this capi stuff? I suppose I could try and chuck the isdn card but I'll need it later...
Cheers, Jean-Michel. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
