On Fri, 26 Nov 2004, [ISO-8859-1] "Dr. Fernando Macías Garza" wrote:
> >>Configuration for first span on card 1 is: > >> > >>span=5,1,0,ccs,hdb3 > >>bchan=118-132 > >>dchan=133 > >>bchan=134-148 > >> > >>However, zttool reports card as "Internally Clocked". No matter how I've > >>tried, I cannot get card 1 to clock from the external source: > >>Sync Source: Internally clocked I'm just a newbie, and I really don't know what I'm talking about, but is it possible that while you're telling the card to treat the span as its primary clock source, the telco hasn't provisioned the line to provide clock, so the card is 'falling back' to its own clock? Try swapping the lines in the first port of both cards, and see if it's now card 0 that is using its internal clock. -- Rick Green "They that can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety." -Benjamin Franklin _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users