Guess at this point I'd call digium support and open a ticket. ------------------------ > Yes. I've tried: > > - ztcfg > - rmmod the wct4xxp module and zaptel and modprob'ing again > - rebooting the server. > > No matter what I do, the second card is always "internally clocked". The E1 I > have plugged into that board is good. It can > clock the first card just fine. > > This is my complete zaptel.conf, just for reference: > > # E1 ISDN PRI. > > span=1,1,0,ccs,hdb3 > bchan=1-15 > dchan=16 > bchan=17-31 > > # E1 R2 > > span=2,2,0,cas,hdb3 > cas=32-46:1101 > cas=48-62:1101 > > # E1 ISDN PRI > > span=3,0,0,ccs,hdb3 > bchan=63-77 > dchan=78 > bchan=79-93 > > # T1 Channel bank. > > span=4,0,0,esf,b8zs > fxsks=94-101 > fxoks=102-117 > > # E1 ISDN PRI. Same carrier as span 1. Line can be exchanged with span 1 and > all is OK. > > span=5,1,0,ccs,hdb3 > bchan=118-132 > dchan=133 > bchan=134-148 > > # E1 Unused. > > span=6,0,0,ccs,hdb3 > unused=149-163 > unused=164 > unused=165-179 > > # E1 Unused > > span=7,0,0,ccs,hdb3 > unused=180-194 > unused=195 > unused=196-210 > > # T1 Channel bank. > > span=8,0,0,esf,b8zs > fxoks=211-234 > > Fernando > > Rich Adamson wrote: > > Your description makes perfect sense. My system is still getting HDLC > overruns, which are > > > certainly a consequence of frame > > > slips because the second card is not getting clocked from the > external source. > > I come back to my basic question: > > How do you configure an asterisk system so that a second TE410P card > recognizes an external > > > clock source? No matter > > > what I've done the second card is always reported as "internally > clocked". Configuring span 5 > > > (the first on the second board) > > > with exactly the same timing parameters as for span 1 (which works > great) is not doing it. > > > What is the trick? > > > Can anybody share the config files for a succesful installation with > more than one TE410P > > > boards? > > > I don't recall from your previous postings on this topic, so I'll ask. > > After config'ing span 5 in /etc/zaptel.conf, are you reloading/restarting > the drivers? (That _is_ necessary.) > > Rich > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > ---------------End of Original Message-----------------
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users