On Fri, 2004-12-10 at 16:15, Steven Critchfield wrote: > Forwarded back to the list so others might get the benefit of the > answers, and I get fact checked by others.
In FC3 the file /etc/modules.conf becomes /etc/modprobe.conf > > -------- Forwarded Message -------- > > From: Lee <[EMAIL PROTECTED]> > > Reply-To: Lee <[EMAIL PROTECTED]> > > To: Steven Critchfield <[EMAIL PROTECTED]> > > Subject: Re: [Asterisk-Users] udev or not? > > Date: Fri, 10 Dec 2004 13:00:29 -0800 > > On Fri, 10 Dec 2004 06:36:02 -0600, Steven Critchfield > > <[EMAIL PROTECTED]> wrote: > > > On Thu, 2004-12-09 at 23:39 -0800, Lee wrote: > > > > > > > > > > I'm just getting started with asterisk on White Box Linux 3.0 > > > > I have a x100p card in the PC. > > > > > > > > If I reboot and immediately do a "ztcfg -vv" I get the well known > > > > "Unable to open master device '/dev/zap/ctl'. If I then do a "modprobe > > > > wcfxo" this error disappears and Asterisk runs fine. > > > > > > > Asterisk runs fine as long as I do a modprobe wcfxo after each reboot, > > > > prior to running Asterisk. I can make and receive calls through the > > > > x100p. I would just like to solve the error issue. Thanks. > > > > > > Check in /etc and look for a file with module in the name. On my debian > > > machine it is /etc/modules. In there you can place your wcfxo driver > > > name and it will auto load everytime. > > > Thanks for the help. There is indeed a file called /etc/modules.conf > > but it appears to already have wcfxo in it, unless in misunderstood > > what you are recommending. Are you saying that I should add "modprobe > > wcfxo" to this file? > > > > /etc/modules.conf: > > --------------------------------------------- > > alias eth0 e100 > > alias sound-slot-0 via82cxxx_audio > > This is why I was somewhat vague. Check again for a file that is > just /etc/modules. It should have a comment about loading modules one at > a time at boot time. Make sure you also get the zapata module listed as > well. The modules.conf file you mentioned is a config file about what to > do when a module is loading or unloading. -- Howard. LANNet Computing Associates; Your Linux people <http://www.lannetlinux.com> ------------------------------------------ "When you just want a system that works, you choose Linux; when you want a system that just works, you choose Microsoft." ------------------------------------------ "Flatter government, not fatter government; Get rid of the Australian states." _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
