On Tue, 14 Dec 2004 03:22:47 -0600, Justin Carlson <[EMAIL PROTECTED]> wrote: > If anyone has a working unidencomm.txt and uniden<MACOFPHONE.txt file Could > you please post it.
Hi Justin, I am using the UIP200 here at home. Find pasted my configuration files. Note that I haven't tested everything in the file, but basic functionality (inbound and outbound calling) definately works. As does the MWI. This is based on the 4.59a firmware. Different firmwares may have different configurations? uniden<MACOFPHONE>.txt ---------------------- # UIP200 Mass Configuration System Mac-based File # Notes: Lines start with '#' are comments # To leave a field value unchanged (as saved on local phone), leave value to blank. # To disable a field, use '-' as value # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: BS.459a # Firmware. The items listed in this Firmware section must be in this order. # FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate is YES # FimrwareFileName only used if FirmwareVersion differ from firmware ver in Flash AutoFirmwareUpdate YES #choices are YES and NO FirmwareFileName uip200_459aenc.pac FirmwareVersion BS4.59a # Sip Settings MyLcdDisplay 1001 MyDialNumber 1001 DisplayName Apartment 1406 UserNameForProxy 1001 PasswordForProxy 1001 UserNameForRegistrar 1001 PasswordForRegistrar 1001 # Programmable Keys. Key functionality must go before key values. ProgrammableKey1 OneTouchDial ProgrammableKey2 OneTouchDial ProgrammableKey3 OneTouchDial ProgrammableKey4 OneTouchDial ProgrammableKey5 TwoTouchDial ProgrammableKey6 DoNotDisturb ProgrammableKey7 VMA ProgrammableKey8 Mute # One and Two-touch keys. Must go after Programmable keys functionality definitions. # Refer to Programmable and Fixed Function Keys for usage guide # OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial OneTouchKey1 1000 OneTouchKey2 OneTouchKey3 OneTouchKey4 1601 OneTouchKey5 2001 OneTouchKey6 OneTouchKey7 8500 OneTouchKey8 TwoTouchDigit0 TwoTouchDigit1 TwoTouchDigit2 TwoTouchDigit3 TwoTouchDigit4 TwoTouchDigit5 TwoTouchDigit6 TwoTouchDigit7 TwoTouchDigit8 TwoTouchDigit9 # Hotline and vmwi numbers --Must be placed after OneTouchDial's HotLineNumber - VmaDirectCallNo 8500 #value associating with VMA Programmable key. VmwiLampIndicator Enable TimeDisplay Enable #end of file unidencom.txt ------------- # UIP200 Mass Configuration System Generic File # Notes: # 1. Lines start with '#' are comments # 2. To leave a field value unchanged (as saved on local phone), leave value to blank. # 3. To set a field's value to empty, use '-' as value. # 4. To NOT overwrite user local settings of: programmable key, one/two touch keys, VMA # number, VMWILampIndicator, set "OverwriteLocalSetting = NO". Default is "YES". This # key will ALSO affect whether or not THESE settings in uniden<MAC>.txt be used. # 5. Any duplicate parameters exist in both unidencom.txt and uniden<MAC>.txt, MAC settings # will be used. # MAXIMUM FILE SIZE IS 10KB # Current Limitation: No spaces allowed for a setting's value # Version: 4.59a #Overwrite user local settings of programmable keys, one/two touch keys, vma settings #If set to no, these current settings on the phone will not be overwritten. OverwriteLocalSettings YES # must be placed on top of config file # Sip Settings --If only ProxyServer needed, set OutboundProxy1/Port same as ProxyServer/Port ProxyServer 192.168.1.1 # can be an IP address or FDQN ProxyServerPort 0 # 0 to use default port OutboundProxy1 192.168.1.1 # can be an IP address or FQDN OutboundProxy1Port 0 # enter a port number or 0 for default (5060) Registrar1 192.168.1.1 # can be an IP address or FQDN Registrar1Port 0 # enter a port number or 0 for default (5060) RegisterExpireSec 3600 RegisterRetrySec 90 Q_Param 50 RegisterExpireLimitPercent 10 FailoverRetrySec 8 SipPort 5060 SRVRecordName - #_sip._udp.unisip.com # options are ON or OFF SessionTimerSupport ON # options are ON or OFF SessionTimerRefresher ON SessionTimerMin 60 TimerInterval0 300 TimerInterval1 150 # Audio Settings G711MuTxPacketLength 20 G711MuJitterBufferLength 10 G711MuJitterBufferMax 200 G711ATxPacketLength 20 G711AJitterBufferLength 10 G711AJitterBufferMax 200 G729TxPacketLength 20 G729JitterBufferLength 10 G729JitterBufferMax 200 LongHoldAlertPeriod 360 # options are ON and OFF DiffServMode OFF DefaultDiffServParam 192 RTPDiffServParam 160 # options are TRUNKMODE, CASCADEMODE, DISABLE VlanMode DISABLE VlanID 1 PcVlanID 2 #TftpAddress 10.1.0.17 # save to phone and used next time if not offered from DHCP TimeZone -5 # choices are YES and NO EnableDST YES # choices are YES and NO EnableSNTP yes # SNTP Server IP address SntpServerIP 192.168.1.1 # Time period (in seconds) before recontacting SNTP server SntpRetrySec 1800 # preferred codec are listed from most preferred, separated by commas and NO space PreferredCodec g711u,g711a,g729 # choices are English, Spanish, and French Language English #choices are Enable and Disable CallWaiting Enable # EmergencyProxyPrefix ** #Admin password must be numeric. Max is 6 digits. Format: oldpassword/newpassword AdminPassword 1234/1111 #end_of_file sip.conf entry -------------- [1001] ; uniden uip200 type=friend username=1001 secret=1001 qualify=yes nat=never host=dynamic canreinvite=no context=administrator dtmfmode=rfc2833 ;disallow=all ;allow=ulaw mailbox=1001 HTH, Leif Madsen. http://www.leifmadsen.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users