When I make a call to either 706 or 707 from any phone, the phone attached to the spa does not ring. However, if I pick up the appropriate phone, the connection is made and normal conversation can take place.
I had the same problem with a Cisco 827-4V. It turned out that the phones were fussy about ringing frequency, given the relatively low output voltage from the SLIC on most FXS devices. The command "pots ringing-freq 50Hz" fixed it.
On the SPA, under "Ring and CWT Cadence", you can set ring waveform, frequency, and voltage. Try increasing the voltage, and/or setting the frequency up to 50 Hz or down to 20 Hz.
--Stewart _______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
