I addressed the issue below with editing the .config file in my 2.6.10 source file by adding
CONFIG_CRC_CCITT=m
recompiled, and now I can modprobe wcfxs and zaptel without any errors, and ztctl -vvv shows
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
1 channels configured.
All seems well with the card, on slot 4, the LED is lit and solid. The only issue I am having now, which I think is a config issue, is the following when I try to make an outbound call:
Mar 27 01:07:58 WARNING[2416]: channel.c:1901 ast_request: No channel type registered for 'ZAP'
Mar 27 01:07:58 NOTICE[2416]: app_dial.c:746 dial_exec: Unable to create channel of type 'ZAP'
my zapata.conf file has only the following: signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes echotraining=400 callerid=asreceived group=1 context=Home channel => 4
and extensions.conf has the following line to reference the card:
exten => _1NXXNXXXXXX,1,Dial,Zap/1/${EXTEN}I dont have a zaptel.conf file anywhere. Also, after googling round, I noticed someone mentioning that the IRQ's of the card cannot match anything else, and this prompted me to check my system. lspci shows the card as
02:06.0 Communication controller: Tiger Jet Network Inc. Intel 537
however I do not see it when I cat /proc/interrupts
CPU0 CPU1 0: 10068788 17261 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
7: 0 0 IO-APIC-edge parport0
9: 0 0 IO-APIC-level acpi
17: 18427 0 IO-APIC-level eth1
18: 9984624 74 IO-APIC-level aic7xxx, aic7xxx, wctdm
19: 101219 0 IO-APIC-level uhci_hcd, eth0
NMI: 0 0
LOC: 10087470 10087469
ERR: 0
MIS: 0
This part has me baffled; is it the system, the OS, or the configs in *. Before I got the errors I mentioned below to go away, the LED never lit.
Any ideas? Thanks.
Russ wrote:
Greetings all,
I was wondering if anyone else has run across the following errors when trying to modprobe wcfxs
zaptel: Unknown symbol crc_ccitt_table zaptel: Unknown symbol crc_ccitt_table torisa: Unknown symbol zt_receive torisa: Unknown symbol zt_ec_chunk torisa: Unknown symbol zt_lboname torisa: Unknown symbol zt_transmit torisa: Unknown symbol zt_rbsbits torisa: Unknown symbol zt_unregister torisa: Unknown symbol zt_register torisa: Unknown symbol zt_alarm_notify zaptel: Unknown symbol crc_ccitt_table zaptel: Unknown symbol crc_ccitt_table zaptel: Unknown symbol crc_ccitt_table wcfxs: Unknown symbol zt_receive wcfxs: Unknown symbol zt_qevent_lock wcfxs: Unknown symbol zt_ec_chunk wcfxs: Unknown symbol zt_transmit wcfxs: Unknown symbol zt_unregister wcfxs: Unknown symbol zt_hooksig wcfxs: Unknown symbol zt_register
ztcfg -vvv
Zaptel Configuration ======================
Channel map:
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
1 channels configured.
Notice: Configuration file is /etc/zaptel.conf line 143: Unable to open master device '/dev/zap/ctl'
kernel 2.6.10
Any ideas?
Thanks _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
