Hello everybody,
I am having trouble setting up a SIP/analog phone gateway. The SIP phones are working, just the Zaptel card doesn't seem to work. I am using the zaptel TDM400P with one FXO module on the last bank (should be channel 4 I suppose).
When I try to dial out (either via console or using SIP, I get the following error:
--- Asterix console error -----
*CLI> dial 9
-- Executing Dial("OSS/dsp", "Zap/4") in new stack
Apr 4 10:18:16 WARNING[6294]: channel.c:1901 ast_request: No channel type registered for 'Zap'
Apr 4 10:18:16 NOTICE[6294]: app_dial.c:746 dial_exec: Unable to create channel of type 'Zap'
== Everyone is busy/congested at this time
--- END Asterix console error -----
I searched and googled now for 2 days without success, so if ANYBODY has ANY idea, I would be really really gratefull!!!
Here is what I do:
===== /etc/Zaptel.conf ====== loadzone=us defaultzone=us fxsks=4
==== /etc/asterisk/zapata.conf ===== context=local signalling=fxs_ks echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=1.5 txgain=1.5 immediate=no busydetect=no callprogress=no musiconhold=default usecallerid=yes callerid=asreceived channel=>4
=== extensions.conf ===
[local]
ignorepat => 9
exten => 9,1,Dial,Zap/4
exten => 9,2,Congestion
exten => _9N.,1,Dial,Zap/4/${EXTEN:1}
exten => _9N.,2,Congestion
exten => 2000,hint,SIP/2000 ; Channel hints for presence===== startup ======
# modprobe zaptel # modprobe wcfxs # /sbin/ztcfg -vvv
====>> Console output:
Zaptel Configuration ======================
Channel map:
Channel 04: FXS Kewlstart (Default) (Slaves: 04)
1 channels configured.
====>> Dmesg output Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 3 for device 03:0a.0 Freshmaker version: 71 Freshmaker passed register test Module 0: Not installed Module 1: Not installed Module 2: Not installed Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Registered tone zone 0 (United States / North America) Registered tone zone 0 (United States / North America)
Then I start asterisk. The thing is: It really doesn't look like the zap channel gets registered:
[EMAIL PROTECTED] asterisk]# asterisk -vvvvc | grep channel
== Registered channel type 'Modem' (Generic Voice Modem Channel Driver)
== Registered channel type 'SIP' (Session Initiation Protocol (SIP))
== Registered channel type 'Agent' (Call Agent Proxy Channel)
== Registered channel type 'MGCP' (Media Gateway Control Protocol (MGCP))
== Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2))
== Registered channel type 'Local' (Local Proxy Channel Driver)
== Registered channel type 'Skinny' (Skinny Client Control Protocol (Skinny))
== Registered channel type 'Console' (OSS Console Channel Driver)
== Registered channel type 'Phone' (Standard Linux Telephony API Driver)
Does anybody have ANY idea?????
Thanks in advance Maik
-- Simply Efficient - IT Services, Consulting, Training "We Keep Our Promises" Vancouver, BC Phone: +1 604.315.8446 Fax : +1 604.731.1147 http://www.simplyefficient.ca
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
