Nicolas Olivier wrote:
I'm trying to setup a small BRI ISDN <-> voip gateway. The ISDN card is based on Cologne chipset, so I try set it up with zaphfc.
The versions i'm running: kernel-2.4.27 Asterisk 1.0.7-BRIstuffed-0.2.0-RC8e zaptel modules 1.0.7 zaphfc is from bristuff-0.2.0-RC8e
When I'm doing the insmod on zaptel, zaphfc, zaprtc:
Zapata Telephony Interface Registered on major 196 PCI: Found IRQ 12 for device 00:12.0 zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xc3840000 fifo 0xc2d58000(0x2d58000) IRQ 12 HZ 100 zaphfc: Card 0 configured for TE mode Registered Span 1 ('ZTHFC1') with 3 channels Span ('ZTHFC1') is new master zaphfc: 1 hfc-pci card(s) in this box. Registered Span 2 ('ZTRTC/1') with 0 channels Real Time Clock Driver v1.10e
I'm using zaprtc as the gateway is running on a VIA motherboard without USB controller.
[..]
Why are you running zaprtc? zaphfc provides your needed timing source. -- Best regards
Peer Oliver Schmidt PGP Key ID: 0x83E1C2EA
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users