On 2 Sep 2005 at 12:58, James FitzGibbon wrote:
> [EMAIL PROTECTED] wrote:
>
> >
> >>I've been futzing with a Sipura SPA-3000 for a month now, and still
> >>can't get it to work the way I want. I'd like to go with a
> >>stripped-down version of my original * setup, and that requires a single
> >>FXO card.
> >>
> >>
> What I want to do is incredibly simple (in my mind at least).
>
> Bell line into the FXO port, cordless phone into the FXS port. Incoming
> calls from the PSTN go to a specific extension in *. When the rules
> allow it to, * can ring the cordless phone. When the cordless phone is
> taken off hook, you get dial and any digits you dial are handled by a
> different * context. * can then direct your call out the FXO port, or
> (in some future iteration) to another SIP termination service.
Well I have a Sipura 3000 connected at my home in Georgetown which takes
inbound
PSTN calls back to an * server in Brampton (to an IVR menu), the FXS port on
this
device is an extension of the * server
* is able to use the FXO port for outbound PSTN calls in Georgetown if the
correct
prefix is entered
I'll admit it took some playing around, but once configured has worked
flawlessly
JP
