No I dont, and please do hook me up =)
On 4/27/06, Ian Service <[EMAIL PROTECTED]> wrote:
Hmm, I should really read all of your message before I reply. This list
should have a "no replies before 9am" policy or something.
Do you have a Smartnet contract on the phone? My reseller can hook you up
if you need one. They were $10 each for my phones and then (as far as I
know) I can call Cisco and get support.
- Ian
On 4/27/06, Ian Service <[EMAIL PROTECTED]> wrote:
>
> With my 7940s and 60s, whenever I run into a looping cycle like that
(usually with one client who's natted), I press *, 6 and Settings at the
same time to reset the phone, then I hold #. Then while it's resetting, it
will say "Reset key sequence detected" and then you punch in: 123456789*0#
and then it will reset to factory defaults.
>
> So far that hasn't failed me, I hope it helps you,
>
>
> - Ian
>
>
>
> On 4/26/06, Gary T. Giesen <[EMAIL PROTECTED] > wrote:
> > I attempted a firmware upgrade to the latest SIP code (8.0(2)SR1) and
> > after the phone sitting for 10 minutes at the white Cisco screen, I
> > power cycled it. Now the phone wont boot at all. On power up, the Mute
> > button lights up first, then the Handsfree button lights up and stays
> > on. Nothing happens after that. I've tried during the factory reset
> > procedure (holding down # while powering up) but I don't get the
> > sequence of line lights flashing. I've also tried power it up with the
> > handset off hook, and I get the Headset button light first, then the
> > Mute, and then the Handsfree button stays on. I consoled the phone,
> > and here's what I got:
> >
> > CNU 3.1(1.15); Mar 21 2006 21:51:25
> > Copyright (c) 2001-2005 Cisco Systems, Inc. All rights reserved.
> >
> > SYSMSG: Last reboot cause -> Power Loss
> > -->init: ver 3.7(1.4)
> > -->init: Starting syslogd...
> > -->syslogd: [2] ver 3.0 (2.0)
> > -->syslogd: waiting for filesystem...
> >
> >
> > It hangs there indefinitely. Any thoughts on resolving this would be
> > appreciated. Right now all I've got is a *very* expensive brick.
> >
> >
---------------------------------------------------------------------
> > To unsubscribe, e-mail: [EMAIL PROTECTED]
> > For additional commands, e-mail: [EMAIL PROTECTED]
> >
> >
>
>
