I suppose you can connect a modem to it and use the B-Channels for 64K data (x2) = 128K. Back in tha day that used to be pretty good bandwidth.
They never asked if it was for data or voice. -----Original Message----- From: Nabeel Jafferali [mailto:[EMAIL PROTECTED] Sent: Friday, December 01, 2006 3:37 PM To: [email protected] Subject: RE: [on-asterisk] Digium Wildcard B410P Is that meant to be for voice, or is meant to be for data but supports voice? I spoke to Bell several times about Microlink and was told it's a data-only service. I guess I spoke to a lot of clueless sales reps. Nabeel > -----Original Message----- > From: Justin Sweeney [mailto:[EMAIL PROTECTED] > Sent: December 1, 2006 3:33 PM > To: Nabeel Jafferali; [email protected] > Subject: RE: [on-asterisk] Digium Wildcard B410P > > I have four (4) Bell ISDN. Each of them has two 416-xxx-xxxx numbers. > One on each B Channel. If you connect an ISDN Telephone set to the > line you use it to make and receive phone calls. It is my > understanding that all an ISDN (Microlink BRI [Basic Rate Interface]) > is...is a fractionalized PRI [Primary Rate Interface]. > > Having said this...it should be possible to use the ISDN line as a > trunk line. This way I get all the digital features of > T-1 without the cost. > > Justin > > -----Original Message----- > From: Nabeel Jafferali [mailto:[EMAIL PROTECTED] > Sent: Friday, December 01, 2006 3:30 PM > To: [email protected] > Subject: RE: [on-asterisk] Digium Wildcard B410P > > My understanding is Bell only provides 2B+D ISDN for data, not voice. > > > -----Original Message----- > > From: Justin Sweeney [mailto:[EMAIL PROTECTED] > > Sent: December 1, 2006 3:22 PM > > To: '[EMAIL PROTECTED]' > > Cc: [email protected] > > Subject: RE: [on-asterisk] Digium Wildcard B410P > > > > But can't I use a stadard ISDN Line provided by Bell? > > > > -----Original Message----- > > From: Nabeel Jafferali [mailto:[EMAIL PROTECTED] > > Sent: Friday, December 01, 2006 3:22 PM > > To: 'Justin Sweeney' > > Subject: RE: [on-asterisk] Digium Wildcard B410P > > > > I don't think you will find a BRI provider in Toronto. > > > > > -----Original Message----- > > > From: Justin Sweeney [mailto:[EMAIL PROTECTED] > > > Sent: December 1, 2006 10:34 AM > > > To: [email protected] > > > Subject: RE: [on-asterisk] Digium Wildcard B410P > > > > > > http://www.digium.com/en/products/hardware/b410p.php > > > > > > Hi; > > > > > > Has anyone had any experience with the Digium B410P card? > > > > > > > > > > > > What I want to do is... > > > > > > Interface and ISDN line to an Asterisk Box and use it as a > > PRI Trunk > > > (in this case it will be a BRI) Then port multiple DID's. > > > > > > This should give me 2 B channels instead of 24 B Channels > and a lot > > > cheaper! I really don't need 24 channels for most small business > > > applications. > > > > > > Is this doable? > > > > > > Justin > > > > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For additional > commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
