why do not you send a email to les.net. He will help you to solve the problem.
Thanks Lloyd On 2/6/07, Dave Donovan <[EMAIL PROTECTED]> wrote:
Hi David, Do you get an error message on the Asterisk console? It's often helpful to see what's happening by turning on a verbose logging mode with "set verbose 20" or something like that. Consider posting that here, it's often helpful in debugging. Do you get audio in one direction? I haven't used Les.net <http://les.net/> but maybe if you are able to post some more info, someone on the list will be able to help. Personally most of my "SIP connection problems" have boiled down to a typo in an IP address or the dialplan or something. Dave On 2/5/07, David Sfiligoi <[EMAIL PROTECTED]> wrote: > > Hi, > > Based on an earlier thread where some taug users les.net was pretty > good I decided to give it a try. I have been banging my head against this > problem for a while since probably it is my own problem. So far no problem > receiving phone call when configured on both SIP and IAX. However, I cannot > seem to make outbound phone call work on SIP(it does woek on IAX). WhenI > phone I get some lday saying that the peer is incorectly configured. I have > tried many things(including what les recommends), just can't seem to get > it. Using some other voip company on sip I have no issue on sip. Anybody > has some sample config that works well?(please remove your personal info if > you post your config) Alternatively anybody that can help. > > Here the relevant sip.conf > > [lesnet_peer] > type=friend > host=did.voip.les.net > canreinvite=no > dtmfmode=rfc2833 > insecure=very > disallow=all > allow=ulaw > allow=gsm > nat=yes > username=peername > secret=itssecret > > > register => peername:[EMAIL PROTECTED]/peername > > and extensions.conf > > exten => _6NX.,1,Dial(SIP/lesnet_peer/${EXTEN:1}) > exten => _6NX.,2,Congestion > exten => _61NX.,1,Dial(SIP/lesnet_peer/${EXTEN:1}) > exten => _61NX.,2,Congestion > > thanks, > David > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
