David,

I have les.net working with an old version of [EMAIL PROTECTED] (soon to be
updated to Trixbox).

I recollect I had to go thru a "head banging" process till I found out that
some of the issues were on my end, but there were other issues where les was
very helpful.

If you get a recorded message, maybe you have called les about it if not, I
would recommend talking to him over the phone, he is very helpful.

Les is very helpful, I would recommend contacting him via email or voice.

Elliott

> -----Original Message-----
> From: David Sfiligoi [mailto:[EMAIL PROTECTED] 
> Sent: Monday, February 05, 2007 11:09 PM
> To: [email protected]
> Subject: [on-asterisk] termination via les.net
> 
> 
> Hi,
> 
> Based on an earlier thread where some taug users les.net  was 
> pretty good I decided to give it a try. I have been banging 
> my head against this problem for a while since probably it is 
> my own problem.  So far no problem receiving phone call when 
> configured on both SIP and IAX. However, I cannot seem to 
> make outbound phone call work on SIP(it does woek on IAX). 
> WhenI phone I get some lday saying that the peer is 
> incorectly configured.  I have tried many things(including 
> what les recommends), just can't seem to get it.  Using some 
> other voip company on sip I have no issue on sip. Anybody has 
> some sample config that works well?(please remove your 
> personal info if you post your config) Alternatively anybody 
> that can help. 
> 
> Here the relevant sip.conf
> 
> [lesnet_peer]
> type=friend
> host=did.voip.les.net
> canreinvite=no
> dtmfmode=rfc2833
> insecure=very
> disallow=all
> allow=ulaw
> allow=gsm
> nat=yes
> username=peername
> secret=itssecret
> 
> 
> register => peername:[EMAIL PROTECTED]/peername
> 
> and extensions.conf
> 
> exten => _6NX.,1,Dial(SIP/lesnet_peer/${EXTEN:1})
> exten => _6NX.,2,Congestion
> exten => _61NX.,1,Dial(SIP/lesnet_peer/${EXTEN:1})
> exten => _61NX.,2,Congestion
> 
> thanks,
> David
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
> 
> 
> 


Reply via email to