Hi Bruce, What does the asterisk log say when it can't establish the bridge ? Have you tried "sip debug peer 192.168.2.10" ? Do you have a STUN server configured in your voice settings ? Try disabling it, because it may tell your trixbox to talk to your wrt54gp2 through the WAN port of your DSL modem/router combo. Finally, regarding the fact that you can't ping the wrt54gp2 through the WAN port, it could be simply that the wrt54gp2 is set to reject pings from the internet (as far as that router is concerned, the 192.168.2.10 is the "internet"). I think you can disable that through the Security -> Filter -> Filter anonymous internet requests option. However, I don't think that's going to help with your issue.
Liviu ----- Original Message ----- From: Bruce Nik To: [email protected] Sent: Saturday, April 14, 2007 5:53 PM Subject: [on-asterisk] cascading routers Hello everyone, My Linksys WRT54GP2 registers nicely with my TBox but once I dial out the native bridge between Tbox trunk and WRT54GP2 fails (I knwot his from CLI logs). I know something is wrong with my network setup; plz help me find it. This is my setup: Internet => DSL Modem/Router Combo => WRT54GP2 Internet => DSL Modem/Router Combo => TBox DSL uses ip range: 192.18.2.x WRT54GP2 uses same ip range: 192.168.2.x and infact has 192.168.2.10 They are both on same subnet: 255.255.255.0 DHCP is turned on on DSL Modem/Router combo but it is disabled on WRT54GP2. I know why the native bridge doesn't happen though. It happens because if I have a PC connected to main DSL Modem/router it can not ping WRT54GP2 even though WRT54Gp2 has obtained the 192.168.2.10 ip. But, if I connect PC directly to WRT54GP2 directly then I can browse internet and also browse admin page for WRT54GP2. Any solutions? Basically I want to cascade these two routers but it doesn't seem to work :( thanks ------------------------------------------------------------------------------ Get news, entertainment and everything you care about at Live.com. Check it out!
