Brent, I guess this hinges on what you mean by inexpensive, and how you want it to handle power outages. If you're willing to spend a couple hundred bucks, then one of several Asterisk configurations would work.
You could buy a cheap PC for $50, an FXO card for $30, a UPS for $70 and you with a bit of work, you're in business. That would only give you a short amount (maybe 10 minutes) of runtime in a power outage. You could get a WRT54GL, load Asterisk on it, and hook it up to an ATA and that would use much less power. You might do that for close to $200. There are tonnes of other configs that can work. As for non-asterisk solutions, you're looking at pretty basic features, other than the long message length. Still, I'm sure if you looked hard enough you'd be able to find a consumer grade, solid state answering machine to do what you want. Good luck. Dave On 6/6/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Hi. I'm looking for advice on how to configure an inexpensive answering machine. I would like a "turnkey" answering machine that can deliver a long greeting (up to 20 minutes), capture messages for play back, and handle unexpected power outages. Remote greeting configuration and message play back is required. Extensions are not needed. The system will monitor one analog phone line. The ideal answering machine is inexpensive, low maintenance and unlikely to make outbound calls (i.e. no dial-out.) What's the best way to proceed? Best Regards, Brent --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
